Verity Medical NeuroTrac IFC Rehab Manual de usuario

OPERATION MANUALIFC Stimulator / Dual channel TENS&NMS Stimulator Three product in one!NeuroTrac IFC RehabTMENG

NeuroTrac™ IFC Rehab Operation Manual105. Operating NeuroTrac™ IFC Rehab5.1 Getting started1. Insert four AA batteries into the battery compartment

NeuroTrac™ IFC Rehab Operation Manual117. When the programme is done amplitude automatically returns to 0 8. If required adjust the time of the pro

NeuroTrac™ IFC Rehab Operation Manual125.2. Setting up IFC Custom programme. Continuous mode custom IFC programme (PC1)1. Select PC1 by pressing IF

NeuroTrac™ IFC Rehab Operation Manual135.3. Setting up TENS/NMS Custom programme.Custom TENS programme (PC1)1. Select PC1 by pressing TENS/NMS PROG.

NeuroTrac™ IFC Rehab Operation Manual145. Press “CHA+” button again to change to work time adjustment screen. Flashing WORK segment indicates that

NeuroTrac™ IFC Rehab Operation Manual155.4. IFC programme table and modesProg No. MODEInterferential Frequency Dwell , modulation or W/R time Prog. I

NeuroTrac™ IFC Rehab Operation Manual16Description of IFC modes:1. Abrupt (ABT)Output with low frequency for a set dwell time and then abrupt change

NeuroTrac™ IFC Rehab Operation Manual175.5. TENS/NMS programme tables and modesProg No. Mode Frequency (Hz) Pulse Width (µS)Prog.TimeTENS predenedP0

NeuroTrac™ IFC Rehab Operation Manual18Description of TENS/NMS modes1. Continuous /Conventional TENS (CON)Continuous train of constant value pulses (

NeuroTrac™ IFC Rehab Operation Manual19Programme : P13 Phase 1 Phase 2 Phase 3 Phase 4 Phase 5Phase time min 6Mode CONFrequency work Frequency restPu

NeuroTrac™ IFC Rehab Operation Manual2Table of Contents1. Contra Indications Precautions and Warnings______________ _ 32. Introduction to the product

NeuroTrac™ IFC Rehab Operation Manual20Programme: P15 Phase 1 Phase 2 Phase 3 Phase 4 Phase 5Phase time min 50Mode W/RFrequency work Frequency restP

NeuroTrac™ IFC Rehab Operation Manual21Programme: P17 Phase 1 Phase 2 Phase 3 Phase 4 Phase 5Phase time min 5 12 5 12 6Mode CON MF CON MF CONFrequenc

NeuroTrac™ IFC Rehab Operation Manual22Programme: P19 Phase 1 Phase 2 Phase 3 Phase 4 Phase 5Phase time min 5 20 10Mode CON W/R CONFrequency work Fre

NeuroTrac™ IFC Rehab Operation Manual23Programme: P21 Phase 1 Phase 2 Phase 3 Phase 4 Phase 5Phase time min 5 5 5 5 5Mode CON W/R CON W/R CONFrequenc

NeuroTrac™ IFC Rehab Operation Manual24Programme: P23 Phase 1 Phase 2 Phase 3 Phase 4 Phase 5Phase time min 5 15 10Mode CON W/R CONFrequency work Fre

NeuroTrac™ IFC Rehab Operation Manual25Programme: P25 Phase 1 Phase 2 Phase 3 Phase 4 Phase 5Phase time min 5 15 10 15 5Mode CON W/R W/R W/R CONFrequ

NeuroTrac™ IFC Rehab Operation Manual26Programme: P27 Phase 1 Phase 2 Phase 3 Phase 4 Phase 5Phase time min 25 20 10Mode CON CON CONFrequency work Fr

NeuroTrac™ IFC Rehab Operation Manual275.6. Lock Mode function A “concealed” Lock buttons are included in the NeuroTrac™ IFC Rehab, which allows th

NeuroTrac™ IFC Rehab Operation Manual286. Skin Electrodes( Self� adhesive electrodes)Electrode placementThe placement of electrodes is one of the mos

NeuroTrac™ IFC Rehab Operation Manual29Avaliable types of electordesShape Code DescriptionVS.404040 x 40 mm, square (* max 53mA)VS.505050 x 50 mm,

NeuroTrac™ IFC Rehab Operation Manual31. Contra indications Precautions and WarningsPlease read the following prescription information carefully befo

NeuroTrac™ IFC Rehab Operation Manual30Practical tips + If you nd the electrodes will not stick due to oily skin, cleanse the skin with soap and wa

NeuroTrac™ IFC Rehab Operation Manual31Lead Wires y Use only the set of lead wires provided with the device. y When connecting and disconnecting the

NeuroTrac™ IFC Rehab Operation Manual32Table 201: Guidance and manufacturer’s declaration � electromagnetic emissionThe NeuroTrac™ product is intend

NeuroTrac™ IFC Rehab Operation Manual33Table 204: Guidance and manufacturer’s declaration – electromagnetic immunityThe NeuroTrac™ product is intende

NeuroTrac™ IFC Rehab Operation Manual34Table 206: Recommended separation distances between portable and mobile RF communications equipment and NeuroT

NeuroTrac™ IFC Rehab Operation Manual359. Technical SpecicationGeneralNumber of channels: 2 for TENS/NMS and 2 for IFCChannel isolation: Depend

NeuroTrac™ IFC Rehab Operation Manual36Interferential Stimulation (IFC)Carrier Frequency: 4000Hz nominal , xedAdjustable Frequency:4001�4150Hz nomin

NeuroTrac™ IFC Rehab Operation Manual37TENSAmplitude: 0 � 80 mA Indication only; actual mA will tend to be less than indicated due to electrode imped

NeuroTrac™ IFC Rehab Operation Manual38Key to symbols used on the Device labeling.Caution, consult accompanying documentsBF applied part equipment (

NeuroTrac™ IFC Rehab Operation Manual3910. TroubleshootingProblem Possible cause RemedyThe display does not come on and there is no signal from the

NeuroTrac™ IFC Rehab Operation Manual4 y Stimulation should not be applied over the carotid sinus nerves, particu�larly in patients with a known sens

NeuroTrac™ IFC Rehab Operation Manual4011. WarrantyVerity Medical Ltd., provides a warranty to the original purchaser that this prod�uct will be fre

NeuroTrac™ IFC Rehab Operation Manual41

NeuroTrac™ IFC Rehab Operation Manual42

NeuroTrac™ IFC Rehab Operation Manual43

NeuroTrac™ IFC Rehab Operation Manual44 Doc. Revised Issue Date: 28/09/2011 Document Number: VM�IFC184�OM001�2 Distributor:The De

NeuroTrac™ IFC Rehab Operation Manual5Precautions:  Isolated cases of skin irritation may occur at the site of the electrode place�ment following lo

NeuroTrac™ IFC Rehab Operation Manual62. Introduction to the productNeuroTrac™ IFC Rehab is a pain control and muscle stimulator device. It combines

NeuroTrac™ IFC Rehab Operation Manual7These larger nerve bres transmit less unpleasant sensations such as touch or warmth, assisting us to form an i

NeuroTrac™ IFC Rehab Operation Manual83. Description of display IFC side TENS/NMS side 1. Programme num

NeuroTrac™ IFC Rehab Operation Manual93. IFC SET/ESC Button: a). SET function (home screen of custom programme). Pressed and hold for 3 seconds e