Verity Medical NeuroTrac IFC Rehab Manual de usuario descargar pdf (Pagina 12)

NeuroTrac™ IFC Rehab Operation Manual

5.2. Setting up IFC Custom programme.

Continuous mode custom IFC programme (PC1)

1. Select PC1 by pressing IFC PROG. button

2. Press and hold IFC SET/ESC button for 3 seconds to enter custom pro�

gramme parameter adjustment menu

3. Flashing Hz symbol indicates that frequency can be adjusted. Use “CH2 +”

or “CH2 -” to adjust frequency in range from 1 � 150 Hz ( 1 Hz step)

4. Once frequency is adjusted press SET/ESC button to save settings and

return to Home screen

Work/Rest mode IFC custom programme(PC2)

1. Select PC2 by pressing IFC PROG. button

2. Press and hold SET/ESC button for 3 seconds to enter custom programme

parameter adjustment menu

3. Flashing Hz symbol indicates that frequency can be adjusted. Use “CH2 +”

or “CH2 - “ button to adjust frequency in range from 1 � 150 Hz ( 1 Hz step)

4. Press “CH1+” button to change to work time adjustment screen. Flashing

WORK segment indicates that work period can be adjusted. Use “CH2 +”

or “CH2 - “ button to adjust the time in range from 1 � 99 seconds (1 sec.

increments).

5. Press “CH1+” button again to change to rest time adjustment screen.

Flashing REST segment indicates that rest period can be adjusted. Use

“CH2 +” or “CH2 - “ button to adjust the time in range from 1 � 99 seconds

(1 sec. increments).

6. Press SET/ESC button to save settings and return to home screen.

If “CH1+” button was pressed again rather than SET/ESC then the device

would loop back to the Hz adjustment screen, similarly if “CH1

�” button

was pushed LCD would loop back to Work time setting screen.

7. Repeat above procedure to re�adjust custom programme.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 43 44

Sin comentarios

Verity Medical NeuroTrac IFC Rehab Manual de usuario Pagina 12